Standards Compliance Tests in Electrical Installations

Powerlineer — Electrical installation testing and control services in Sakarya Serdivan in accordance with TSE standards

In order to ensure safety and energy efficiency in electrical installations, the system It must pass standard compliance tests. As Powerlineer, we measure and report according to national and international standards in both new installations and existing systems.

⚙️ 1. What is the Suitability Test?

Compliance testing is carried out in accordance with the standards of the electrical installation, TSE, IEC and Electrical Internal Facilities Regulation. It is a set of tests that determine whether it works safely or not.

Grounding measurement
Insulation resistance test
Residual current relay control
Voltage drop analysis

📋 2. Purpose of Tests

Eliminating the risk of electric shock and fire
Increasing energy efficiency
To fulfill legal obligations
Detecting system failures in advance

🔌 3. Main Tests Performed

• Grounding Test

The grounding resistance of the facility is measured. The resistance value should be below 5 ohms.

• Insulation Resistance Test

The strength of the insulation in cables and panels is tested with a megger device. If there is a low resistance value, there is a risk of leakage current.

• Continuity Test

The continuity of the protection conductors (PE line) is checked. This is necessary for the system to correctly trigger the protection element when leakage current occurs.

• Voltage Drop Test

Voltage losses between phases and phase-neutral lines are measured. Excessive voltage drop affects the performance of equipment.

📊 4. Thermal Imaging Analysis

Overheating in panels and cables is detected with thermal cameras. This analysis is critical to detect insulation deterioration in advance.

🧾 5. TSE and IEC Standards

Materials and test methods used in electrical installations It must comply with TSE 6001 and IEC 60364 standards. This compliance is mandatory for both occupational safety and legal validity.

🧰 6. Reporting Test Results

The results of the tests are recorded digitally and an official conformity report is prepared. This report is a valid document for periodic audits.

Grounding and insulation values
Voltage analysis results
Field report with photo
TSE conformity table

📍 Conformity Testing and Certification with Powerlineer

Powerlineer, electrical installation conformity tests throughout Serdivan and Sakarya, Provides measurement and certification services. All tests are carried out by certified engineers according to TSE standards.